Multi-Unit Abutment Systems for Complex Restorations
In this section, you can buy the Multi-Unit Abutment System—a prosthetic system with screw fixation of crowns and splint constructions to the abutment without the use of cement. The Multi-Unit prosthetics system is indispensable for complex reconstructions when a large part of the tooth row must be restored. While the Multi-Unit system is not designed for single restorations, it offers numerous advantages in cases of multiple restorations:
Advantages of the Multi-Unit System
Cement Rejection at the Soft-Tissue Level: The abutment and implant are connected with a screw, eliminating cement at the interface between the implant and abutment. The crown or splint bridge structure is attached to the abutment with another screw. There is an intermediate component—the connection sleeve (see illustration below)—which is rigidly glued into the structure of crowns or splint bridges. Adhesive cement is used here, but all operations occur outside the patient’s oral cavity. After manufacturing and fitting, the prosthesis is fixed to the abutment, and the point where the screw enters the crown is sealed.This is the key difference between the Multi-Unit system and cemented abutments. All adhesives and cementitious compositions are used outside the patient’s oral cavity, which is beneficial because cement residues can cause irritation and inflammation of the gingiva. Although the cement residue at the junction of the crown and abutment is removed, the dentist can’t always reach tricky areas between the teeth, especially in splinted designs with complex configurations. For single implants, cemented crown fixation is still used.
Permanent Abutment Fixation: The abutment is screwed in once and for all. Crowns and bridges can be changed from temporary to permanent or from a paired implant to a bridge structure for three or four teeth if additional teeth are lost over time. Throughout these manipulations, the implant remains completely protected and immobilized.
Better Lateral Load Distribution: Compared to cement fixation, prosthetics on the Multi-Unit platform load the top of the implant less, as proven by studies. This is especially important if implants with a diameter of less than 4 mm are used. These models have a relatively thin wall in the coronal part, and there is a high risk of implant failure if the Ti-base platform is used. Additionally, the Multi-Unit system abutment not only distributes the load better but also acts as a mechanical safety guard. In the event of extreme stress, the abutment screw will break first, not the implant. Removing the broken screw is relatively easy, after which the restoration can be repaired. To prevent recurrence, it is recommended to adjust the problematic crown out of the bite.
Reduced Micromovement at the Implant/Abutment Level: In Multi-Unit systems, micromovement is significantly lower than when using cement-retained crowns. This is crucial because there is always a micro-gap between the implant and the abutment. If the connection is movable, a “pump effect” occurs—pumping fluid with bacteria through the gingival cuff into the internal structures of soft tissues. If microflora from the oral cavity penetrates into the sterile environment of soft tissues and alveolar bone, it can cause inflammation, potentially resulting in the loss of the implant.
Easier Achievement of Passive Fit: With screw fixation, achieving a passive fit (no internal stresses) is much simpler. This reduces the risk of loosening and breaking of the screws. The prosthesis on the Multi-Unit can be removed, adjusted, or replaced without internal stresses. Even if local overstresses remain, they are transferred to the area between the abutment and the removable sleeve, where they are easier to manage. Any micromotion that remains is located above the level of soft tissues and will not cause the pump effect or gum inflammation. All operations are straightforward and can be performed quickly and almost painlessly. In contrast, removing cemented restorations is difficult and very traumatic, which is harmful to both soft tissues and bone, as the implant can move, causing additional bone injury.
Ideal for Complex Cases: Screw fixation of crowns works well in challenging situations with bone deficiency and the inability to line up implants along the dentition. The Multi-Unit system allows implants to be placed at different angles and even in a staggered pattern. Placing the implants at angles to each other is beneficial and recommended, as it allows for even load distribution and reduces the risk of loosening and breaking of the screws. With the Multi-Unit system, achieving a high-quality restoration of the dentition is easier (see the photo below).
Suitable for Low Crown Heights: If the crown height is 3–4 mm, you also need to buy Multi-Unit screw-retained abutments. Cementation will not hold such a crown in the long term, and the risk of crown loss is very high.
Easy Removal of Crowns and Bridges: When using Multi-Unit screw abutments, it is necessary to drill through the crown to reach the screw and remove the bridge structure from the abutment. With the cement fixation technique, the crown has to be physically dislodged from the abutment—a traumatic procedure with a real risk of bone damage. The impact is transmitted to the jawbone like a lever.
Economic and Reputational Benefits for Dentists: Despite the components of the Multi-Unit system being noticeably more expensive, their use is beneficial in the long run. Complex structures on the Ti-base platform often have internal overstresses, contributing to the unscrewing of screws or the destruction of the cement layer (crowns become separated). Such problems frequently occur within a few months after the restoration is installed. There are two possible scenarios:
The patient goes to another specialist who remakes the prosthesis. The new dentist often switches from Ti-base to Multi-Unit; the prosthesis works better, the patient is satisfied, and remains a client of the new specialist.
You have to redo the restoration and fix problems at your own expense. These problems arise in difficult cases, and the amount of work is substantial. In any case, this negatively affects your income, although your reputation can be maintained.
List of Multi-Unit Components Available for Purchase Online
Multi-Unit D-type abutments (MUA) provide better functionality and freedom of action for the dentist, resulting in better outcomes for patients. We have already mentioned the main advantages of the screw fixation system earlier. You can buy both angled Multi-Unit abutments and straight Multi-Unit abutments from us. Please note that we offer different types of Multi-Unit abutments: integrated with a screw and two-component, where the abutment and fixation screw are separate items.
You can also choose and buy straight and angled abutments with different interface heights above the implant level. This allows us to solve the most complex prosthetic problems. For example, when there is local bone deficiency and it is necessary to install dental implants at significant angles relative to the dentition. This approach enables the avoidance of complex operations for vertical bone augmentation or open sinus lift, where the risk of complications can reach 20% or more.
Combinations of straight and angled abutments are most commonly used for full-arch restorations, including in combination with zygomatic dental implants. Multi-Unit abutments are great for conditionally removable dentures, where the dentist removes the denture once a year to clean it and treat the gums if necessary. Also, the screw-retained system with angled abutments is well-suited for cases of immediate installation of a complete reconstruction—situations where the denture begins to function within a few hours after implantation.
Multi-Unit abutments are also suitable in all cases where All-on-4 or All-on-6 implants are required. This is because it is possible to place the implants at angles to overcome anatomical limitations and distribute the masticatory load evenly in all planes. We offer Multi-Unit angled abutments with 17 and 30-degree angles. A 17-degree Multi-Unit angled abutment allows compensation for deviation angles up to 74 degrees, and the 30-degree variant can compensate for angles up to 100 degrees.
Uniqa Dental straight and angled abutments are made of Grade 23 titanium alloy, which has high strength (comparable to Grade 5 alloy) but superior plasticity. This is especially important for angular structures where the load is unevenly distributed. The screw-retained system also allows the connection between the root implant and the abutment to be brought to gingival level. This minimizes soft tissue trauma when the restoration must be removed and reinstalled, which is extremely important because soft tissue health is a crucial factor in a patient’s quality of life.
Additional Components Available:
Healing Caps (Gingiva Formers): For the formation of the gingival socket.
Sleeves for Straight and Angled Multi-Units: Available for both temporary and permanent dentures.
Screws: For attaching Multi-Unit abutments to the implant as well as for attaching the prosthesis (bridge) to the Multi-Unit abutment.
Adapters and Transfers: For taking impressions and modeling the splint construction outside the oral cavity.
Why It’s Profitable to Buy Multi-Unit System Components from Us
There are many suppliers of dental implantation elements with beautiful presentations and confident sales representatives in expensive suits. We have taken a different approach. You can buy our products on this site and enjoy free delivery, even for a single unit. This reduces the final price due to the absence of hospitality expenses and print advertising. If you decide to order Multi-Unit abutments or related accessories from us, you will receive:
Impeccable Quality: We invest in technology, not marketing with flashy brochures and big promises.
Free Shipping: We offer free delivery of any components anywhere in the world.
Fast Delivery within the United States: We have warehouses and representative offices in the USA for prompt service.
Exclusive Uniqa Prime Loyalty Program
At Uniqa Dental, we value our customers and their continued trust in our products. That’s why we’ve created the Uniqa Prime Loyalty Program, designed to offer additional benefits to dental professionals who choose our Multi-Unit Abutment Systems and other products. Here’s what you can expect when you join:
$500 Welcome Bonus: Get $500 for registering and placing your first order online directly through our website.
Cash Back Rewards: Earn cash back on every dollar you spend with us, allowing you to save more as you purchase more.
Bulk Purchase Discounts: Receive up to 35% off when your spending exceeds $5,000, perfect for stocking up on Multi-Unit components.
Review Rewards: Earn additional rewards for sharing your experiences with our products through reviews.
Join Uniqa Prime today to start maximizing your benefits and savings on our Multi-Unit Abutment Systems and all other Uniqa Dental products.
Private Label Opportunities
For dental practices and implant companies looking to establish or enhance their brand, Uniqa Dental offers private label opportunities for our Multi-Unit Abutment Systems and other products. Here’s how our private label service can benefit your business:
Brand Enhancement: Offer high-quality Multi-Unit components under your own brand name, increasing recognition and trust among your patients or customers.
Customization: We can tailor the packaging and labeling to match your brand identity while maintaining the superior quality of our products.
Competitive Edge: Differentiate yourself in the market by offering a unique line of Multi-Unit Abutment Systems backed by Uniqa Dental’s expertise and manufacturing excellence.
Flexible Ordering: Benefit from our low minimum order quantities and fast turnaround times, allowing you to manage inventory efficiently.
Quality Assurance: Rest assured that all private label products meet the same high standards as our branded items, including CE and ISO 13485 certifications.
Whether you’re a growing dental practice looking to offer your own line of implant components or an established implant company seeking to expand your product range, our private label service for Multi-Unit Abutment Systems can help you achieve your goals.
You can also place an order for samples for testing. We will send an evaluation kit for the nominal price of $1.
500 UDS when you sign up!
Keep your cart save!
A link to set a new password will be sent to your email address.
Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.
Don’t loose your products!
Leave your email and we’ll save them for you. Unlock $200 off for your first purchase above $300!
Leave us your email
We will contact you ASAP
Now you get
Set of drills for free
$312.00$0
add more implants and get Surgical kit for free & up to 35% off your cart
Now you get
Surgical kit for free + 10% off your cart
$980.00$0
add more implants and get up to 35% off your cart
Now you get
Surgical kit for free + 20% off your cart
$980.00$0
add more implants and get up to 35% off your cart
Now you get
Surgical kit for free + 35% off your cart
$980.00$0
Please help us become better
We use cookies to give you the best possible experience when using our website. By clicking ‘Accept’ we can bring you relevant advertising and personalised content – and generally give you a much more enhanced visit. If you’d rather take the time to read which cookies we can use, click ‘Privacy Policy’.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.